Home water desalination device problems and solutions
Problems with home water desalination devices, the most important of which are:
Weak water pressure, desalination device stops working, desalination device does not stop working, water taste changes
Description of diagnosing problems with home water desalination devices
Weak water pressure resulting from the device and its several causes are the following points:
- Neglecting to change the stages of purifying impurities and clogged pores
Solution: Change the dead stages
- Neglecting to change the reverse osmosis stage ( membrane ) and it becomes clogged
Solution: Change the two membranes of the fourth stage
- Low air pressure in the pressure tank of the device or damage
Solution: Check the tank pressure and increase or change the air
- Poor pump pressure or damage for several reasons
Solution: Replace it with a new one
- The water drainage regulating valve is damaged, which leads to weak water or complete cessation of the water filter
Solution: Replace it with a new one
- Closing the salt valve completely reduces the amount of water produced and increases the drainage rate.
Solution: Balance the salt cock using a TDS measuring device
The water filter has stopped working, its causes and solutions. We will review them with you in the following points:
- Adapter damaged
Solution: replace it
- Damage to the built-in pump of the device
Solution: replace it
- Damage to one of the sensors regulating the entry and exit of water and the operation of the pump
Solution: Replace the damaged ones
The water filter does not stop working. The reasons and solutions we will review with you in the following points:
- Failure of the float of the self-filling bottle or the bottom
Solution: Weigh the float, replace it, or replace the bottle
- Damage to one of the sensors regulating the entry and exit of water and the operation of the pump
Solution: Replace the damaged one
- There is a leak in one of the clamps or gaskets, or a hole in the hoses
Solution: Detect the leak, repair it, and replace damaged parts
One of the most important problems with home water desalination devices is changing the taste of water. The most important causes and solutions are:
- The stages of the device are not well made
Solution: Replace it with original-made stages. Click here
- Installing the second stage incorrectly in the direction where its work is canceled
Solution: Correct its direction
- Failure to adhere to the timing of changing the device stages at the correct time according to the schedule
Solution: Adhere to a filter change schedule
- Do not change the post-carbon phase, which is responsible for killing the bacteria that cause color, odor and taste
Solution: Replace it with a new, well-made stage
- Do not operate or use the device for more than three days or more
Solution: Turn on the device and drain the water stored in the tank to allow new water to enter
Important tips about home water desalination devices
Do not neglect the timing of changing the stages of water purification and desalination devices of all types
Weigh the percentage of salts at each filter change and when going from summer to winter and vice versa
Water filter malfunctions, home water filter malfunctions, 5-stage filter malfunctions, home water filter maintenance, water filter change.
Smart Filter Saudi Arabia
Smart Filter KSA